{"title":"CUAV","description":"","products":[{"product_id":"fc-cuav-new-pixhawk-v6x","title":"FC CUAV New Pixhawk V6X","description":"\u003cp\u003e\u003cstrong\u003eInformation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePixhawk V6X is a new generation Pixhawk developed by CUAV and PX4, based on the modular design of the Pixhawk FMU V6X standard. It offers maximum safety and stability during use, and users can also customize the carrier plate according to their needs. It uses H7 double-precision arithmetic unit and Cortex-M3 co-processor, features three redundant IMUs with independent buses and power supplies, factory pre-calibrated temperature IMU technology, double redundant barometric design and a new generation of patented damping design for flight safety and extensive UAV panoramic expansion capabilities.\u003c\/p\u003e\n\u003cp\u003eThe integrated 100M Ethernet interface enables data exchange with UAV installation equipment such as workstations, and includes optical inertial navigation and mapping cameras to meet the needs of high-end UAVs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReal-time double precision H7 processor\u003c\/li\u003e\n\u003cli\u003eHigh performance ARM M3 coprocessor\u003c\/li\u003e\n\u003cli\u003eLow noise automotive IMU\u003c\/li\u003e\n\u003cli\u003eTriple redundant IMU and double redundant barometer\u003c\/li\u003e\n\u003cli\u003eCar magnetometer RM3100\u003c\/li\u003e\n\u003cli\u003eNew integrated damping design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eHardware:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePixhawk FMUv6x Standard\u003c\/li\u003e\n\u003cli\u003eDS-010 Pixhawk AutoPilot Bus Standard\u003c\/li\u003e\n\u003cli\u003eDS-012 Pixhawk AutoPilot V6X Standard\u003c\/li\u003e\n\u003cli\u003eSTM32H753IIK6 processor\u003c\/li\u003e\n\u003cli\u003e32-bit Arm® Cortex®-M7 480MHz MCUs, 2MB Flash, 1MB RAM\u003c\/li\u003e\n\u003cli\u003eSTM32F10X coprocessor\u003c\/li\u003e\n\u003cli\u003eAccelerometer and gyroscope: ICM42688-P, ICM-20649, BMI088\u003c\/li\u003e\n\u003cli\u003eRM3100 compass\u003c\/li\u003e\n\u003cli\u003eBarometer: 2×ICP-20100\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eInterface:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInputs\/Outputs: 16\u003c\/li\u003e\n\u003cli\u003ePower supply: 4 (2 for UAVCAN, 2 for SMBUS)\u003c\/li\u003e\n\u003cli\u003eGPS: 2 (1 GPS port with I2C and protection switch (GPS1), 1 interface with I2C and GPS (GPS2))\u003c\/li\u003e\n\u003cli\u003eBODY: 3\u003c\/li\u003e\n\u003cli\u003eCAN: 2\u003c\/li\u003e\n\u003cli\u003ePPM RC: 1 (dedicated R\/C input for PPM)\u003c\/li\u003e\n\u003cli\u003eSBUS\/DSM\/RSSI: 1 (dedicated R\/C input for Spektrum\/DSM and S.Bus with analog\/PWM RSSI input)\u003c\/li\u003e\n\u003cli\u003eSBUS Outputs: 1\u003c\/li\u003e\n\u003cli\u003eFMU Debug: 1\u003c\/li\u003e\n\u003cli\u003eIO Debug: 1\u003c\/li\u003e\n\u003cli\u003eEthernet: 1\u003c\/li\u003e\n\u003cli\u003eSPI External: 1 (SPI6 interface, for expansion of external sensors)\u003c\/li\u003e\n\u003cli\u003eADIO: 1 (AD3.3\/ADC6.6)\u003c\/li\u003e\n\u003cli\u003eUART4: 1\u003c\/li\u003e\n\u003cli\u003eUSB: 2 (1 for Type-C, 1 for GH USB interface)\u003c\/li\u003e\n\u003cli\u003eTF Slot: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePhysical Properties:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating voltage: 4.75~5.45V\u003c\/li\u003e\n\u003cli\u003eServo input voltage: 0~9.9V\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -20~85°C\u003c\/li\u003e\n\u003cli\u003eDimensions: 45×90×29.2 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 99g (Core: 43g, Base: 56g)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baltic Drones","offers":[{"title":"Default Title","offer_id":55962330005891,"sku":"A1002","price":369.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/1873\/3443\/files\/17167-3_fc-cuav-new-pixhawk-v6x.jpg?v=1752056087"},{"product_id":"fc-cuav-v5","title":"FC CUAV V5+","description":"\u003cbody\u003e\n\n\n\u003cstyle\u003e\n  body {\n    font-family: Arial, sans-serif;\n    font-size: 14px;\n  }\n\n  pre {\n    font-family: Arial, monospace;\n    white-space: pre-wrap;\n  }\n\n  .highlight {\n    font-weight: bold;\n  }\n\u003c\/style\u003e\n\n\n\u003cpre\u003eFlight controller CUAV V5+\n\nThe CUAV V5+ is a professional-grade flight controller featuring a powerful dual-processor design: a 216 MHz STM32F765 Cortex-M7 for primary flight tasks and a dedicated 24 MHz STM32F100 Cortex-M3 for I\/O handling. It integrates triple redundant IMUs (ICM-20602, ICM-20689, BMI055), an IST8310 magnetometer, and an MS5611 barometer for rock-solid stability and precision. With 14 PWM outputs, dual CAN, SBUS, PPM\/DSM inputs, multiple UARTs, I²C, SPI, and a safety-enabled GPS interface, the V5+ supports complex VTOL and multicopter configurations. Rated for 4.5–36 V servo rail and –20 °C to +85 °C operation, it’s ideal for industrial, surveying, and professional aerial platforms.\n\nSpecifications:\n\nMain MCU: STM32F765, 216 MHz, 2 MB Flash, 512 KB RAM\nI\/O MCU: STM32F100, 24 MHz, 8 KB SRAM\nIMUs: ICM-20602 + ICM-20689 + BMI055 (Accel \u0026amp; Gyro redundancy)\nMagnetometer: IST8310\nBarometer: MS5611\nOperating Voltage: 4.5–5.5 V\nUSB Power Input: 4.75–5.25 V\nServo Rail Input: 0–36 V\nEnvironment: –20 °C to +85 °C\nSize \u0026amp; Weight: 85.5 × 42 × 33 mm, 91 g\n\nInterfaces:\n\nPWM outputs ×14 (6 configurable as GPIO)\nSBUS out ×1; PPM in ×1; DSM\/PPM\/RC SPort\/ RSSI ×1\nADC ×1 (3.3 V\/6.6 V)\nTelemetry UARTs ×2; Serial UART ×1\nCAN buses ×2\nSPI ×1; I²C buses ×4\nGPS interface with safety switch \u0026amp; buzzer (I²C) ×1\nUSB Type-C ×1; Debug port ×1; TF (microSD) slot ×1\n\nPackage Includes:\n\n1 × CUAV V5+ Flight Controller\n1 × USB-C Configuration Cable\n4 × Anti-vibration Mounts\n4 × M3 Mounting Screws \u0026amp; Nuts\n1 × Quick-Start Guide\n1 × Safety-Switch Jumpers Kit\n\n\u003c\/pre\u003e\n\n\u003c\/body\u003e","brand":"Baltic Drones","offers":[{"title":"Default Title","offer_id":55962341933443,"sku":"A0601","price":259.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/1873\/3443\/files\/17233-8_fc-cuav-v5.jpg?v=1752056281"},{"product_id":"fc-cuav-x7-pro","title":"FC CUAV X7+ Pro","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUAV X7 PRO flight controller\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe CUAV X7 PRO flight controller is an advanced autopilot developed by CUAV. It uses a more powerful STM32H7 processor and combines industrial sensors with extremely low temperature drift. Compared to previous versions of flight controllers, it offers better performance and higher reliability. ArduPilot firmware works fine on this board. X7 PRO is ideal for industrial drones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInternal damping\u003c\/li\u003e\n\u003cli\u003eModular construction, possibility to create your own support plate\u003c\/li\u003e\n\u003cli\u003eUSB_HS support for faster downloads\u003c\/li\u003e\n\u003cli\u003eSupport multiple outputs with DShot support\u003c\/li\u003e\n\u003cli\u003eINS heating support for better sensor performance\u003c\/li\u003e\n\u003cli\u003eDedicated battery port\u003c\/li\u003e\n\u003cli\u003e3 sets of INS sensors\u003c\/li\u003e\n\u003cli\u003eSupport for multiple receivers\u003c\/li\u003e\n\u003cli\u003eHigh precision industrial sensor (ADIS16470+RM3100)\u003c\/li\u003e\n\u003cli\u003eTriple power backup (Power A, Power C, USB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer: CUAV\u003c\/li\u003e\n\u003cli\u003eMain controller: STM32H743\u003c\/li\u003e\n\u003cli\u003eAccelerometer\/Gyroscope: ICM-20649\u003c\/li\u003e\n\u003cli\u003eAccelerometer\/Gyroscope: ADIS16470\u003c\/li\u003e\n\u003cli\u003eAccelerometer\/Gyroscope: BMI088\u003c\/li\u003e\n\u003cli\u003eCompass: RM3100\u003c\/li\u003e\n\u003cli\u003eBarometer: MS5611 x2\u003c\/li\u003e\n\u003cli\u003eFrequency: 480 MHz\u003c\/li\u003e\n\u003cli\u003eFlash memory: 2048K\u003c\/li\u003e\n\u003cli\u003ePower supply module: Digital CAN PMU SE\u003c\/li\u003e\n\u003cli\u003eInterface for receivers: S.BUS\/PPM\/DSM\u003c\/li\u003e\n\u003cli\u003ePeripheral interface: PWM x14 (12 with DShot support)\u003c\/li\u003e\n\u003cli\u003eRSSI: Analog \/ PWM\u003c\/li\u003e\n\u003cli\u003eUART ports for GPS: 2 (GPS and UART4)\u003c\/li\u003e\n\u003cli\u003eI2C bus: 4 (2 dedicated ports)\u003c\/li\u003e\n\u003cli\u003eCAN bus: 2\u003c\/li\u003e\n\u003cli\u003eADC: 2\u003c\/li\u003e\n\u003cli\u003eUSB port: Type-C\u003c\/li\u003e\n\u003cli\u003ePower lines: 2 (Power A combined with current measurement interface, Power C with CAN bus)\u003c\/li\u003e\n\u003cli\u003ePower supply: Power A\/C: 4.3-5.4 V, USB: 4.75-5.25 V\u003c\/li\u003e\n\u003cli\u003eVoltage on servo line: 0-36 V\u003c\/li\u003e\n\u003cli\u003eDimensions: 77 x 45.5 x 39 mm (19.5 mm expansion plate only)\u003c\/li\u003e\n\u003cli\u003eWeight: 101g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage contents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlight Controller Core Module - 1 Piece\u003c\/li\u003e\n\u003cli\u003eExpansion plate - 1 piece\u003c\/li\u003e\n\u003cli\u003eI2C\/CAN cable - 1 piece\u003c\/li\u003e\n\u003cli\u003eADC 3.3 cable – 1 piece\u003c\/li\u003e\n\u003cli\u003eRSSI cable – 1 piece\u003c\/li\u003e\n\u003cli\u003eCAN PMU Lite power supply module – 1 piece\u003c\/li\u003e\n\u003cli\u003eCAN expansion board - 1 piece\u003c\/li\u003e\n\u003cli\u003ePW-LINK telemetry module – 1 piece\u003c\/li\u003e\n\u003cli\u003eUSB Type-C cable - 1 piece\u003c\/li\u003e\n\u003cli\u003eMemory card – 1 piece\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baltic Drones","offers":[{"title":"Default Title","offer_id":55962342457731,"sku":"A0811","price":939.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/1873\/3443\/files\/17236_fc-cuav-x7--pro.jpg?v=1752056292"},{"product_id":"fc-cuav-x7","title":"FC CUAV X7+","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eX7+ Flight Controller\u003cbr\u003eX7+ is an advanced family of autopilots developed by CUAV®. It uses a more powerful STM32H7 processor and is equipped with industrial quality sensors. Compared to previous autopilots, it offers better performance and higher reliability.\u003c\/p\u003e\n\u003cp\u003eThe first generation autopilots have been improved with new sensors that ensure high performance, along with a more reliable power supply and some improvements that allow bi-directional monitoring of DShot and servo voltage.\u003c\/p\u003e\n\u003cp\u003eThe modular design allows users to customize the main board and is fully compatible with the CUAV X7+ carrier board, ideal for academic research and commercial system integration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer: CUAV\u003c\/li\u003e\n\u003cli\u003eFMU main processor: STM32H743\u003c\/li\u003e\n\u003cli\u003eBuilt-in sensors:\n\u003cul\u003e\n\u003cli\u003eAccelerometer\/Gyroscope: ICM-42688-P (X7: BMI088)\u003c\/li\u003e\n\u003cli\u003eAccelerometer\/Gyroscope: ICM-20689\u003c\/li\u003e\n\u003cli\u003eAccelerometer\/Gyroscope: ICM-20689 (X7: ICM-20649)\u003c\/li\u003e\n\u003cli\u003eMagnetometer: RM3100\u003c\/li\u003e\n\u003cli\u003eBarometer: MS5611*2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e14 PWM outputs (12 support Dshot)\u003c\/li\u003e\n\u003cli\u003eSupport for multiple RC inputs (SBU\/CPPM\/DSM)\u003c\/li\u003e\n\u003cli\u003eAnalog\/PWM input: RSSI\u003c\/li\u003e\n\u003cli\u003e2 GPS ports (GPS and UART4 ports)\u003c\/li\u003e\n\u003cli\u003e6 i2c buses (four dedicated i2c ports)\u003c\/li\u003e\n\u003cli\u003e2 CAN bus ports\u003c\/li\u003e\n\u003cli\u003e2 power ports (Power A – general DC interface, Power C – UAVCAN battery interface)\u003c\/li\u003e\n\u003cli\u003e1 ADC input\u003c\/li\u003e\n\u003cli\u003e1 USB port\u003c\/li\u003e\n\u003cli\u003ePower supply: 4.5 - 5.4 V\u003c\/li\u003e\n\u003cli\u003eUSB input: 4.75 - 5.25 V\u003c\/li\u003e\n\u003cli\u003eServo input: 0 - 10 V\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -20 ~ 85 °C\u003c\/li\u003e\n\u003cli\u003eDimensions: 77 x 45.5 x 39 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 101g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage contents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlight controller – 1 pc.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baltic Drones","offers":[{"title":"Default Title","offer_id":55962342883715,"sku":"A0808","price":409.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/1873\/3443\/files\/17239_fc-cuav-x7.jpg?v=1752056303"},{"product_id":"fc-cuav-nora","title":"FC CUAV NORA+","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cp\u003eFC CUAV NORA+\u003c\/p\u003e\n\u003cp\u003eNora® is an advanced controller developed by the independent company CUAV®. It uses a more powerful STM32H7 processor and combines industrial sensors with ultra-low temperature drift. Compared to previous autopilots, it offers better performance and higher reliability. Nora is ideal for academic research and commercial systems integration.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh performance driver\u003c\/li\u003e\n\u003cli\u003eTriple redundancy of inertial navigation\u003c\/li\u003e\n\u003cli\u003eIndustrial grade compass\u003c\/li\u003e\n\u003cli\u003eTemperature compensation increases sensor accuracy\u003c\/li\u003e\n\u003cli\u003eBuilt-in damping system\u003c\/li\u003e\n\u003cli\u003eCompact design\u003c\/li\u003e\n\u003cli\u003eExtended operating conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer: CUAV\u003c\/li\u003e\n\u003cli\u003eMain driver: STM32H743\u003c\/li\u003e\n\u003cli\u003eOperating frequency: 480 MHz\u003c\/li\u003e\n\u003cli\u003eFirmware memory: 2 MB\u003c\/li\u003e\n\u003cli\u003eRAM: 1 MB\u003c\/li\u003e\n\u003cli\u003eStabilization: ICM-42688-P + ICM-20689 x 2\u003c\/li\u003e\n\u003cli\u003eCompass: RM3100\u003c\/li\u003e\n\u003cli\u003eBarometer: MS5611 x 2\u003c\/li\u003e\n\u003cli\u003eExpansion ports: UART x5; I2C x6; CAN x2; ADC; SPI; RSSI (PWM\/0-3.3V)\u003c\/li\u003e\n\u003cli\u003ePWM outputs: 14 (1-12 with DSHOT)\u003c\/li\u003e\n\u003cli\u003eReceiver input: 1 (PPM\/DSM\/S.BUS)\u003c\/li\u003e\n\u003cli\u003ePower inputs: 2\u003c\/li\u003e\n\u003cli\u003eStart fuse: yes (in GPS\u0026amp;SAFETY port)\u003c\/li\u003e\n\u003cli\u003eBuzzer support: yes (in GPS\u0026amp;SAFETY port)\u003c\/li\u003e\n\u003cli\u003eDebug: yes (UART7)\u003c\/li\u003e\n\u003cli\u003eJTAG: yes\u003c\/li\u003e\n\u003cli\u003eUSB: Type-C x2\u003c\/li\u003e\n\u003cli\u003eFlight controller power supply: 4.5 - 5.5 V\u003c\/li\u003e\n\u003cli\u003eServo voltage: 0-36 V\u003c\/li\u003e\n\u003cli\u003eSupported device types: aircraft, helicopter, VTOL, rover and more\u003c\/li\u003e\n\u003cli\u003eMain firmware: Ardupilot v4.10+\/PX4 v1.12.3+\u003c\/li\u003e\n\u003cli\u003eDimensions: 46x64x22 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 90 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe package contains:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlight controller with memory card - 1 pc\u003c\/li\u003e\n\u003cli\u003eUSB Type-C cable – 1 pc\u003c\/li\u003e\n\u003cli\u003eAccessory set (CAN\/I2C distribution board + cable) – 1 pc\u003c\/li\u003e\n\u003cli\u003eAccessory set (PW-Link board + cable) – 1 pc\u003c\/li\u003e\n\u003cli\u003ePMU SE power module with cable - 1 pc\u003c\/li\u003e\n\u003cli\u003eCable set (I2C\/CAN, ADC (with Futaba connector), RSSI) – 1 set.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baltic Drones","offers":[{"title":"Default Title","offer_id":55962343309699,"sku":"A0903","price":409.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/1873\/3443\/files\/17242_fc-cuav-nora.jpg?v=1752056324"},{"product_id":"gps-module-cuav-neo-3-pro","title":"GPS module CUAV NEO 3 Pro","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGPS module CUAV NEO 3 Pro\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProperties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated GNSS module of the new generation Ublox (NEO-M9N)\u003c\/li\u003e\n\u003cli\u003eSupporting the simultaneous operation of four major satellite systems to adapt to more complex environments\u003c\/li\u003e\n\u003cli\u003eSpecial antenna supporting the four main satellite systems\u003c\/li\u003e\n\u003cli\u003eUAVCAN standard protocol, high real-time level, strong anti-interference\u003c\/li\u003e\n\u003cli\u003eIndustrial grade sensor (RM3100) for better protection against interference\u003c\/li\u003e\n\u003cli\u003ePowerful STM32F412 processor\u003c\/li\u003e\n\u003cli\u003eBuilt-in high-precision barometer to cover the requirements of various usage scenarios\u003c\/li\u003e\n\u003cli\u003eOpen software, native software support\u003c\/li\u003e\n\u003cli\u003eDouble SAW+LNA+SAW filter effectively prevents interference of remote control, data transmission and 4G signal when receiving GPS position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessor\u003c\/strong\u003e: STM32F412\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensors\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003eCompass: RM3100\u003c\/li\u003e\n\u003cli\u003eBarometer: MS5611\u003c\/li\u003e\n\u003cli\u003eRTK receiver Ublox M9N\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGNSS bands\u003c\/strong\u003e:\u003cbr\u003eGPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1I, Galileo E1B\/C, SBAS L1 C\/A: WAAS, EGNOS, MSAS, GAGAN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of simultaneous GNSS\u003c\/strong\u003e:\u003cbr\u003e4 satellite systems simultaneously\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum number of satellites\u003c\/strong\u003e:\u003cbr\u003eUp to 32\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRTK update frequency\u003c\/strong\u003e:\u003cbr\u003eUp to 25 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition accuracy\u003c\/strong\u003e:\u003cbr\u003e1.5m (with SBAS; default)\u003cbr\u003e2.0m (without SBAS)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCold start: 24 s\u003c\/li\u003e\n\u003cli\u003eAssisted start: 2 s\u003c\/li\u003e\n\u003cli\u003eRegain: 2s\u003c\/li\u003e\n\u003cli\u003eTracking and navigation sensitivity: -167 dBm\u003c\/li\u003e\n\u003cli\u003eCold start sensitivity: -148 dBm\u003c\/li\u003e\n\u003cli\u003eReacquisition sensitivity: -160 dBm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtocol\u003c\/strong\u003e: DroneCAN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterface Type\u003c\/strong\u003e: GHR-04V-S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage\u003c\/strong\u003e: 5V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature\u003c\/strong\u003e: -10 to 70°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e: 60×60×16 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 33g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baltic Drones","offers":[{"title":"Default Title","offer_id":55962344096131,"sku":"G1202","price":169.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/1873\/3443\/files\/17245-2_neo-3-pro-01.jpg?v=1752056342"},{"product_id":"gps-module-cuav-neo-3","title":"GPS module CUAV NEO 3","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGPS module CUAV NEO 3 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eCUAV NEO 3 GNSS U-Blox M9N GPS module for Pixhawk Compass, Ardupilot PX4 support with open-source UAV 4, navigation by stars.\u003c\/p\u003e\n\u003cp\u003eNEO continues the NEO V2 hardware design, with an upgrade of the GNSS module to the Ublox NEO M9N. It supports simultaneous reception of Beidou, Galileo, GLONASS and GPS, with a horizontal positioning accuracy of up to 0.7m. It has an integrated safety switch, buzzer and RGB indicator.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e CUAV-NEO3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand Name:\u003c\/strong\u003e Feetech\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessor:\u003c\/strong\u003e STM32F412\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensors:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eCompass: IST8310\u003c\/li\u003e\n\u003cli\u003eBarometer: MS5611\u003c\/li\u003e\n\u003cli\u003eRTK receiver: Ublox M9N\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGNSS Ranges:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1I, Galileo E1B\/C, SBAS L1 C\/A: WAAS, EGNOS, MSAS, GAGAN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of simultaneously active GNSS:\u003c\/strong\u003e 4 (Simultaneous reception of satellite information)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum number of satellites:\u003c\/strong\u003e Up to 32\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRTK update frequency:\u003c\/strong\u003e Up to 25 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePositioning accuracy:\u003c\/strong\u003e Up to 1.5m\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCold start:\u003c\/strong\u003e 24 seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuxiliary start:\u003c\/strong\u003e 2 seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecovery:\u003c\/strong\u003e 2 seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking and navigation sensitivity:\u003c\/strong\u003e -167 dBm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCold start sensitivity:\u003c\/strong\u003e -148 dBm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecovery sensitivity:\u003c\/strong\u003e -160 dBm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProtocol:\u003c\/strong\u003e UART+I2C+IO\u003cbr\u003e\u003cstrong\u003eInterface Type:\u003c\/strong\u003e GHR-10V-S\u003cbr\u003e\u003cstrong\u003eInput Voltage:\u003c\/strong\u003e 5V\u003cbr\u003e\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e -10~70°C\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 60x60x16mm\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 33 g\u003c\/p\u003e","brand":"Baltic Drones","offers":[{"title":"Default Title","offer_id":55962344849795,"sku":"G1002","price":89.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/1873\/3443\/files\/17248_gps-module-cuav-neo-3.png?v=1752056355"},{"product_id":"gps-module-cuav-neo-3x","title":"GPS Module CUAV NEO 3X","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGPS module CUAV NEO 3Х\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessor\u003c\/strong\u003e: STM32F412\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtocol\u003c\/strong\u003e: DroneCAN (used for UAV communication)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompass\u003c\/strong\u003e: RM3100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarometer\u003c\/strong\u003e: ICP-20100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGNSS receiver\u003c\/strong\u003e: u-blox M9N\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGNSS specification:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency bands\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003eGPS: L1C\/A\u003c\/li\u003e\n\u003cli\u003eGLONASS: L10F\u003c\/li\u003e\n\u003cli\u003eBeiDou: B1I\u003c\/li\u003e\n\u003cli\u003eGalileo: E1B\/C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent GNSS\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition accuracy\u003c\/strong\u003e: 1.5 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of satellites\u003c\/strong\u003e: 32+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapture speeds\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003eCold start: 24 s\u003c\/li\u003e\n\u003cli\u003eWarm start: 2 s\u003c\/li\u003e\n\u003cli\u003eAssisted start: 2 s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNavigation refresh rate\u003c\/strong\u003e: 5 Hz (default), 25 Hz (MAX)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSensitivity:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking and Navigation\u003c\/strong\u003e: -167 dBm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCold\/warm start\u003c\/strong\u003e: -148 dBm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecovery\u003c\/strong\u003e: -160 dBm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProtection and environment:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection level\u003c\/strong\u003e: IP66 (dust and water resistance)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating voltage\u003c\/strong\u003e: 4.7~5.2V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature\u003c\/strong\u003e: -10°C to 70°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e: 67x67x21.2 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 46g (without cable)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baltic Drones","offers":[{"title":"Default Title","offer_id":55962345439619,"sku":"G1003","price":139.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/1873\/3443\/files\/17251_gps-module-cuav-neo-3x.jpg?v=1752056364"},{"product_id":"gps-module-cuav-c-rtk-9ps-rover-unit-with-stand","title":"GPS Module CUAV C-RTK 9Ps (Rover unit with stand)","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cp\u003eGPS Module CUAV C-RTK 9Ps (Rover unit with stand)\u003c\/p\u003e\n\u003cp\u003eCUAV C-RTK 9Ps - navigation module with centimeter accuracy.\u003cbr\u003eUsing different satellites and frequencies, as well as advanced RTK algorithms, the base station accurately determines its position, providing differentiated data with centimeter accuracy every half second. The update frequency of the RTK algorithm is 20 Hz. This RTK module is compatible with PX4 or Ardupilot autopilots, which makes it ideal for aviation and agricultural applications, ensuring high precision during take-offs, landings and other operations. Equipped with an IST8310 compass for maximum accuracy, the dual RTK module can adapt to complex conditions and provide reliable direction without the need for a magnetic compass, which is especially convenient for flights.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUAV C-RTK 9Ps Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 47 mm * 32 mm * 12.2 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 30g (module only)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompass:\u003c\/strong\u003e IST8310\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGNSS:\u003c\/strong\u003e GPS, BeiDou, Galileo, GLONASS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of current GNSS:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRTK navigation update frequency:\u003c\/strong\u003e 20 Hz, RAW 25 Hz, PVT 25 Hz (maximum limit associated with current settings)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePositioning accuracy:\u003c\/strong\u003e RTK: 0.01 m +1ppm CEP, GPS: 1.5 m CEP, SBAS: 1.0 m CEP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRTK acquisition time:\u003c\/strong\u003e \u0026lt;60 s; Acquisition: cold start \u0026lt;24s, hot start \u0026lt;1s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e Cold Start –148 dBm, Hot Start –157 dBm, Recovery –160 dBm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuppression:\u003c\/strong\u003e Active CW detection and removal, built-in bandpass filter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFraud protection:\u003c\/strong\u003e Advanced fraud detection algorithms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna performance:\u003c\/strong\u003e Rover: 2 dBi, Base: 5 dBi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePPK:\u003c\/strong\u003e Not supported\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterface:\u003c\/strong\u003e UART 2, USB 1, antenna type MMCX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating voltage:\u003c\/strong\u003e 4.5V – 6V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e –40°C to +85°C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baltic Drones","offers":[{"title":"Default Title","offer_id":55962346160515,"sku":"G0808-TX02005","price":439.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/1873\/3443\/files\/17254_gps-module-cuav-c-rtk-9ps--rover-unit-with-stand.jpg?v=1752056384"},{"product_id":"power-distribution-board-cuav-can-pdb","title":"Power distribution board CUAV CAN PDB","description":"\u003cp\u003ePower distribution board CUAV CAN PDB\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupport ultra-wide input voltage 10~62V\u003c\/li\u003e\n\u003cli\u003eContinuous current: 180A\u003c\/li\u003e\n\u003cli\u003ePrecise voltage and current measurement, current measurement accuracy up to 110A is 0.1A, voltage measurement accuracy is 0.05V\u003c\/li\u003e\n\u003cli\u003e14 output channels for servos\u003c\/li\u003e\n\u003cli\u003eDual regulated output interface: provides power output up to 5V\/6A and 12V\/4A for peripheral devices\u003c\/li\u003e\n\u003cli\u003eUltra-thick copper and tin-plated PCB board effectively reduces heating caused by internal circuit resistance at high current\u003c\/li\u003e\n\u003cli\u003eLED power indicator, visually displays LiPo voltage status\u003c\/li\u003e\n\u003cli\u003eUltra low voltage drop with 10 main power outputs\u003c\/li\u003e\n\u003cli\u003eFuture updates will support more features such as highly accurate power consumption statistics and temporary consumption transfer\u003c\/li\u003e\n\u003cli\u003eExcellent heat dissipation and current transfer ability: the ultra-thick PCB copper layer provides excellent current transfer ability, and tinted windows reduce internal resistance and improve heat dissipation ability\u003c\/li\u003e\n\u003cli\u003e78W UBEC Regulated Output: Usually the UBEC of the distribution board has a regulated output of only 1-2A, but the CAN PDB can provide up to 5V\/6A and 12V\/4A regulated output\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baltic Drones","offers":[{"title":"Default Title","offer_id":55962347110787,"sku":"D0401","price":159.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/1873\/3443\/files\/17257_power-distribution-board-cuav-can-pdb.jpg?v=1752056399"},{"product_id":"cuav-power-module-can-pmu","title":"CUAV Power module CAN PMU","description":"\u003cp\u003ePower module CUAV CAN PMU\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDroneCAN PMU\u003c\/strong\u003e is a drone power management module with a built-in STM32F4 processor that uses the CUAV ITT compensation algorithm to accurately measure drone battery voltage and current. It supports 6~62V input voltage and the POWER output port can supply 5V\/8A. It uses advanced CAN bus communication and supports the DroneCAN standard protocol. Each PMU is factory calibrated to ensure good consistency and high accuracy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessor:\u003c\/strong\u003e STM32F412\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage:\u003c\/strong\u003e 6~62V (2S-15S)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum current:\u003c\/strong\u003e 110A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccuracy of voltage measurement:\u003c\/strong\u003e ±0.05V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccuracy of current measurement:\u003c\/strong\u003e ±0.1A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution:\u003c\/strong\u003e 0.01A\/V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum output power:\u003c\/strong\u003e 6000W for 90 s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum continuous power:\u003c\/strong\u003e 5000W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power:\u003c\/strong\u003e 5.4V\/5A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtocol:\u003c\/strong\u003e DroneCAN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e -20~+100℃\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFirmware update support\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNo calibration required\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTypes of connectors:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8mm female bullet power connectors (XT-90 battery and ESC cables are included)\u003c\/li\u003e\n\u003cli\u003eAutopilot power supply: Molex 6 pin 1.5mm #5025850670 (CUAV V5 cable supplied)\u003c\/li\u003e\n\u003cli\u003eCAN: 4 pin JST-GH (cable supplied)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePhysical dimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 46.5mm * 38.5mm * 22.5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 76g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baltic Drones","offers":[{"title":"Default Title","offer_id":55962347864451,"sku":"D0301","price":119.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/1873\/3443\/files\/17260_cuav-power-module-can-pmu.jpg?v=1752056420"},{"product_id":"cuav-airspeed-sensor-skye-2","title":"CUAV Airspeed Sensor SKYE 2","description":"\u003cp\u003eCUAV Airspeed Sensor SKYE 2\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUAV SKYE 2 Airspeed Sensor - heated air speed sensor\u003c\/strong\u003e CUAV SKYE 2 is an improved version of the CUAV SKYE air speed sensor, which offers higher efficiency and reliability compared to its predecessor. It gives pilots the ability to adjust movements, making the flight more controllable, as it takes wind speed into account. CUAV SKYE 2 is made of high-quality materials and has an IP54 degree of protection, making it a dustproof and waterproof sensor. Thanks to its light weight, the sensor can be easily integrated into most drones. Like its predecessor, the CUAV SKYE 2 combines a pitot tube, an air velocity sensor, a temperature and humidity sensor, an ARM M4 processor and a dual temperature control system in one device. The temperature control system prevents freezing and increases the reliability of the drone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUAV SKYE 2 Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMCU:\u003c\/strong\u003e STM32F4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtocol:\u003c\/strong\u003e DroneCAN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasuring speed:\u003c\/strong\u003e 0-381.6 km\/h\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccuracy:\u003c\/strong\u003e ±1% FS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature measurement range:\u003c\/strong\u003e -20°C to 125°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeating element:\u003c\/strong\u003e Two resistance heaters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHumidity measurement range:\u003c\/strong\u003e 0-100%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating voltage:\u003c\/strong\u003e 16-68V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 102 mm \/ 29.4 mm \/ 28.2 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 25 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDegree of protection:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlight control:\u003c\/strong\u003e ArduPilot\/PX4\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baltic Drones","offers":[{"title":"Default Title","offer_id":55962348290435,"sku":"C0116","price":199.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/1873\/3443\/files\/17266_skye-2----1.jpg?v=1752056440"},{"product_id":"cuav-magnetometer-c-compass","title":"CUAV Magnetometer C-compass","description":"\u003cp\u003eCUAV Magnetometer C-compass\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUAV C-Compass\u003c\/strong\u003e is a high precision compass and magnetometer designed for professional use. It features the industrial-grade RM3100 magnetometer, a revolutionary sensor that has revolutionized magnetic field measurement with its exceptional resolution and minimal noise.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUAV C-Compass Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessor:\u003c\/strong\u003e STM32F4 100MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetometer:\u003c\/strong\u003e RM3100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication protocol:\u003c\/strong\u003e DroneCAN\/UAVCAN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication speed:\u003c\/strong\u003e 2Mb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefresh rate:\u003c\/strong\u003e 80Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise:\u003c\/strong\u003e 15nT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccuracy:\u003c\/strong\u003e 0.25° (effective value)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInclination angle accuracy:\u003c\/strong\u003e 0.05°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution:\u003c\/strong\u003e 0.01°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 13nT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasuring range:\u003c\/strong\u003e -800μT to +800μT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible control types:\u003c\/strong\u003e PX4\/ArduPilot (CUAV\/Pixhawk etc.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType of connector:\u003c\/strong\u003e GHR-04V-S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating voltage:\u003c\/strong\u003e 4.75-5.3V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e -20°C to 85°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating humidity:\u003c\/strong\u003e 5%-95% (non-condensing)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Material:\u003c\/strong\u003e Alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baltic Drones","offers":[{"title":"Default Title","offer_id":55962348683651,"sku":"G0303","price":49.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/1873\/3443\/files\/17269-1_c-compass-can.png?v=1752056450"},{"product_id":"cuav-high-voltage-hv-pm-power-module-v5-version","title":"CUAV High voltage HV-PM power module V5+version","description":"\u003cp\u003eCUAV High voltage HV-PM power module V5+version\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe V5 series autopilot kit includes the HV PM module. The following describes how to set up and use HV_PM (High Voltage Module).\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e The CUAV HV_PM module is a new high voltage module independently developed by CUAV and has the following features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigher input voltage: 10V-60V (3s~14s battery)\u003c\/li\u003e\n\u003cli\u003eMore accurate battery monitor: voltage measurement accuracy: ±0.1V; current measurement accuracy: ±0.2A\u003c\/li\u003e\n\u003cli\u003eBEC (5V) maximum current: 5A\u003c\/li\u003e\n\u003cli\u003eMaximum (measured) current: 60A\u003c\/li\u003e\n\u003cli\u003eMaximum output current (ESC\/MOTOR PORT): 60A\u003c\/li\u003e\n\u003cli\u003eSettings via Mission Planner\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSettings via Mission Planner:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitor:\u003c\/strong\u003e Analog voltage and current\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor:\u003c\/strong\u003e CUAV HV PM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAPM Ver:\u003c\/strong\u003e CUAV v5 or APM1 (V5 flight control series select CUAV v5)\u003c\/li\u003e\n\u003cli\u003eClick another interface to write parameters\u003c\/li\u003e\n\u003cli\u003eRestart mp ground station and flight control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSettings via QGroundcontrol:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eHV PM\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of cells:\u003c\/strong\u003e Set according to your battery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull voltage:\u003c\/strong\u003e The voltage of each cell, lithium-ion batteries are generally 4.2V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo-load voltage:\u003c\/strong\u003e LiPo batteries are generally 3.7V, depending on the battery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage divider:\u003c\/strong\u003e 18\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA\/V:\u003c\/strong\u003e 24\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baltic Drones","offers":[{"title":"Default Title","offer_id":55962348781955,"sku":"D0803","price":59.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/1873\/3443\/files\/17272_01-scaled.jpg?v=1752056452"},{"product_id":"data-telemetry-module-cuav-air-link-4g","title":"Data Telemetry Module CUAV Air Link 4G","description":"\u003cbody\u003e\n\n\n\u003cstyle\u003e\n  body {\n    font-family: Arial, sans-serif;\n    font-size: 14px;\n  }\n\n  pre {\n    font-family: Arial, monospace;\n    white-space: pre-wrap;\n  }\n\n  .highlight {\n    font-weight: bold;\n  }\n\u003c\/style\u003e\n\n\n\u003cpre\u003eData Telemetry  CUAV Air Link 4G\n\nThe CUAV Air Link 4G is a high-performance telemetry module that leverages global 4G networks to deliver real-time UAV data with ultra-low 40 ms latency and virtually unlimited range. With AES-encrypted data transmission, it ensures secure MAVLink communication for ArduPilot and PX4 systems. Dual-MMCX antenna ports provide robust signal reception, while an onboard micro-SIM slot allows seamless roaming across LTE, HSPA+, and GSM bands. Compatible with CUAV and Pixhawk flight controllers, it also supports remote debugging and GCS operations via Windows or Android applications. Designed for professional drone operations, it combines convenience, security, and reliability in a compact 54.5 × 33.5 × 13.5 mm package.\n\nNetwork Bands:\n\nLTE FDD: B1, B3, B8\nLTE TDD: B38, B39, B40, B41\nDC-HSPA+\/HSPA+\/HSPA\/UMTS: B1, B5, B8, B9\nTD-SCDMA: B34, B39\nGSM\/EDGE\/GPRS: 900\/1800 MHz\n\nNetwork Speeds:\n\nLTE FDD: 150 Mbps down \/ 50 Mbps up\nLTE TDD: 112 Mbps down \/ 10 Mbps up\nDC-HSPA+: 42 Mbps down \/ 5.76 Mbps up\n\nInterfaces:\n\nUART × 1\nMicro-SIM slot × 1\nMMCX antenna ports × 2\n\nPower \u0026amp; Env:\n\nOperating Voltage: 5 V\nTemperature Range: –10 °C to +60 °C\n\nOther specifications:\n\nData Protocol: MAVLink 1\/2 (ArduPilot, PX4)\nLatency: 40 ms (end-to-end)\nSecurity: AES-encrypted link\nDimensions: 54.5 × 33.5 × 13.5 mm\nWeight: 52 g\n\nPackage Includes:\n\n1 × CUAV Air Link 4G Telemetry Module\n2 × MMCX Antennas\n1 × UART Cable\n1 × Quick-start Guide\n\n\u003c\/pre\u003e\n\n\u003c\/body\u003e","brand":"Baltic Drones","offers":[{"title":"Default Title","offer_id":55964006220163,"sku":"S0801","price":199.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/1873\/3443\/files\/21071_data-telemetry-module-cuav-air-link-4g.jpg?v=1752066243"},{"product_id":"video-data-transmission-module-cuav-lte-link-se-4g","title":"Video \u0026 Data Transmission Module CUAV LTE LINK SE 4G","description":"\u003cbody\u003e\n\n\n\u003cstyle\u003e\n  body {\n    font-family: Arial, sans-serif;\n    font-size: 14px;\n  }\n\n  pre {\n    font-family: Arial, monospace;\n    white-space: pre-wrap;\n  }\n\n  .highlight {\n    font-weight: bold;\n  }\n\u003c\/style\u003e\n\n\n\u003cpre\u003eVideo \u0026amp; Data Transmission Module CUAV LTE LINK SE 4G\n\nThe CUAV LTE-Link SE is an all-in-one 4G video and data transmission module designed for professional UAV applications. It streams up to 1080P video with H.265 encoding and simultaneously carries MAVLink telemetry over global LTE, HSPA+, and GSM networks—delivering up to 150 Mbps downlink and 50 Mbps uplink with just 40 ms latency on data. An onboard 128×64 OLED displays signal and system status, while auto-recording to microSD ensures mission logs are preserved. Compatible with ArduPilot and PX4 on CUAV or Pixhawk controllers, it supports Windows and Android GCS apps for seamless remote piloting and monitoring without range limits.\n\nNetwork Bands:\n\nLTE FDD: B1, B3, B8\nLTE TDD: B38, B39, B40, B41\nDC-HSPA+\/HSPA+\/HSPA\/UMTS: B1, B5, B8, B9\nTD-SCDMA: B34, B39\nGSM\/EDGE\/GPRS: 900\/1800 MHz\n\nNetwork Speeds:\n\nLTE FDD: 150 Mbps down \/ 50 Mbps up\nLTE TDD: 112 Mbps down \/ 10 Mbps up\nDC-HSPA+: 42 Mbps down \/ 5.76 Mbps up\n\nVideo:\n\nResolution: 1080P or 720P\nEncoding: H.265\nStorage: Auto-record to microSD (default)\n\nInterfaces:\n\nMicro HDMI × 1\nUART × 1\nMicro-SIM slot × 1\nMMCX antenna ports × 2\n\nOther specifications:\n\nDisplay: 128×64 OLED\nData Protocol: MAVLink 1\/2 (ArduPilot, PX4)\nLatency: ~40 ms data (typical)\nOperating Voltage: 12 V–55 V\nTemperature Range: –10 °C to +60 °C\nDimensions: 75.3 × 39.2 × 19 mm\nWeight: 78 g\n\nPackage Includes:\n\n1 × CUAV LTE-Link SE 4G Video \u0026amp; Telemetry Module\n2 × MMCX Antennas\n1 × Micro HDMI to HDMI Cable\n1 × UART Data Cable\n1 × Quick-Start Guide\n1 × Mounting Kit (brackets \u0026amp; screws)\n\n\u003c\/pre\u003e\n\n\u003c\/body\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":55964006318467,"sku":"L0501","price":899.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/1873\/3443\/files\/21074_video-data-transmission-module-cuav-lte-link-se-4g.jpg?v=1752066262"},{"product_id":"fc-cuav-7nano","title":"FC CUAV 7nano","description":"\u003cbody\u003e\n\n\n\u003cstyle\u003e\n  body {\n    font-family: Arial, sans-serif;\n    font-size: 14px;\n  }\n\n  pre {\n    font-family: Arial, monospace;\n    white-space: pre-wrap;\n  }\n\n  .highlight {\n    font-weight: bold;\n  }\n\u003c\/style\u003e\n\n\n\u003cpre\u003eFlight controller CUAV 7nano\n\nThe CUAV 7Nano is a cutting-edge flight controller built around a 480 MHz STM32H753 Cortex-M7 MCU with 2 MB flash and 1 MB RAM, designed for demanding UAV applications. It integrates dual IIM-42652 + BMI088 IMUs, IST8310 magnetometer, and dual barometers (ICP-20100 \u0026amp; BMP581) for rock-solid attitude and altitude stability. With 14 configurable PWM outputs, dual GPS ports (one with safety switch), triple CAN buses, Ethernet, and high-speed data ports, the 7Nano offers unparalleled connectivity. Its wide input range (4.5–5.5 V) and robust environmental specs make it ideal for professional drones, VTOLs, and industrial UAV systems.\n\nSpecifications:\n\nProcessor: STM32H753, 32-bit Cortex-M7 @ 480 MHz, 2 MB Flash, 1 MB RAM\nIMU: Dual IIM-42652 \u0026amp; BMI088 (Accel + Gyro)\nMagnetometer: IST8310\nBarometers: ICP-20100 + BMP581\nPower: Operating Voltage: 4.5–5.5 V \/ USB Input: 4.75–5.25 V \/ Servo Rail: 0–10 V\nEnvironment: –20 °C to +85 °C, 5–95 % non-condensing RH\nWeight: 33.8 g\n\nInterfaces:\n\nPWM Outputs: 14 (3.3 V or 5 V configurable)\nRC IN: 1 (PPM, SBUS, DSM, etc.)\nRSSI Input: 1 (PWM or 3.3 V analog)\nADC: 1 (3.3 V \/ 6.6 V)\nData Ports: 2 UARTs\nCAN: 3 (2× CAN1, 1× CAN2)\nGPS: 2 (one with safety switch)\nI2C: 3\nPower Input: Molex 50394-8052\nUSB: 1× USB-C\nEthernet: 100 Mbps\nDebug Port: 1\nStorage: MicroSD slot\n\nPackage Includes:\n\n1 × CUAV 7Nano Flight Controller\n1 × USB-C Configuration Cable\n4 × Anti-vibration Mounts\n1 × Quick-Start Guide\n\n\u003c\/pre\u003e\n\n\u003c\/body\u003e","brand":"Baltic Drones","offers":[{"title":"Default Title","offer_id":55964006384003,"sku":"A0816","price":199.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/1873\/3443\/files\/21077_fc-cuav-7nano.jpg?v=1752066269"},{"product_id":"airspeed-sensor-cuav-ms4525","title":"Airspeed Sensor CUAV MS4525","description":"\u003cbody\u003e\n\n\n\u003cstyle\u003e\n  body {\n    font-family: Arial, sans-serif;\n    font-size: 14px;\n  }\n\n  pre {\n    font-family: Arial, monospace;\n    white-space: pre-wrap;\n  }\n\n  .highlight {\n    font-weight: bold;\n  }\n\u003c\/style\u003e\n\n\n\u003cpre\u003eFlight controller CUAV V5+\n\nThe CUAV MS4525 Airspeed Sensor combines a precision MS4525 differential pressure sensor with a lightweight pitot tube to deliver accurate airspeed data for fixed-wing and VTOL UAVs. Its stainless steel pitot tube (14 × 92 mm) and high-sensitivity silicon pressure transducer offer rapid response and stable readings across a broad flight envelope. Designed for seamless integration with Pixhawk, CUAV V5+, and X7 flight controllers, the sensor supports real-time airspeed compensation, improving autopilot performance and flight safety. At just 17 g, it adds minimal weight while providing essential aerodynamic insights for optimized flight control and energy efficiency.\n\nSpecifications:\n\nSensor Element: TE MS4525DO differential pressure transducer\nPitot Tube Dimensions: 14 mm Ø × 92 mm length\nWeight: 17 g (tube + sensor)\nCompatibility: Pixhawk, CUAV V5+, CUAV X7, and other I²C-capable flight controllers\n\nPackage Includes:\n\n1 × Stainless steel pitot tube (14 × 92 mm)\n1 × MS4525 differential pressure sensor board\n1 × Silicone pressure hose\n1 × I²C flight controller cable\n\n\u003c\/pre\u003e\n\n\u003c\/body\u003e","brand":"Baltic Drones","offers":[{"title":"Default Title","offer_id":55964006416771,"sku":"C0104","price":80.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/1873\/3443\/files\/21080_airspeed-sensor-cuav-ms4525.jpg?v=1752066273"},{"product_id":"magnetometer-cuav-ist8-compass-v5-version","title":"Magnetometer CUAV IST8 Compass V5+ version","description":"\u003cbody\u003e\n\n\n\u003cstyle\u003e\n  body {\n    font-family: Arial, sans-serif;\n    font-size: 14px;\n  }\n\n  pre {\n    font-family: Arial, monospace;\n    white-space: pre-wrap;\n  }\n\n  .highlight {\n    font-weight: bold;\n  }\n\u003c\/style\u003e\n\n\n\u003cpre\u003eMagnetometer CUAV IST8 Compass V5+ version\n\nThe CUAV IST8 is a high-precision external compass module based on the iSentek IST8310 3×3 mm LGA geomagnetic sensor. Designed for seamless integration with CUAV V5+ and Pixhawk flight controllers running PX4 or ArduPilot, it delivers stable heading data in demanding environments. Its compact 23×14×9 mm form factor and 5 g weight make it ideal for space-constrained mounts. Operating over a wide –40 °C to +85 °C range and powered by a 5 V rail, the IST8 connects via I²C for easy setup and calibration. Enhance your autopilot’s navigation accuracy with this robust, low-noise compass module.\n\nSpecifications:\n\nSensor: IST8310 3×3 mm LGA geomagnetic sensor\nOperating Voltage: 5 V\nInterface: I²C\nOperating Temperature: –40 °C to +85 °C\nDimensions: 23 × 14 × 9 mm\nWeight: 5 g\n\nPackage Includes:\n\n1 × Magnetometer CUAV IST8 Compass V5+ version\n\n\u003c\/pre\u003e\n\n\u003c\/body\u003e","brand":"Baltic Drones","offers":[{"title":"Default Title","offer_id":55964006449539,"sku":"G0302","price":49.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/1873\/3443\/files\/21083_magnetometer-cuav-ist8-compass-v5--version.jpg?v=1752066276"},{"product_id":"wifi-telemetry-module-cuav-v5-x7-version","title":"Wifi Telemetry Module CUAV V5+\/X7 version","description":"\u003cbody\u003e\n\n\n\u003cstyle\u003e\n  body {\n    font-family: Arial, sans-serif;\n    font-size: 14px;\n  }\n\n  pre {\n    font-family: Arial, monospace;\n    white-space: pre-wrap;\n  }\n\n  .highlight {\n    font-weight: bold;\n  }\n\u003c\/style\u003e\n\n\n\u003cpre\u003eWifi Telemetry Module CUAV V5+\/X7 version\n\nThe CUAV WiFi Telemetry Module provides seamless, low-latency data links between your flight controller and ground station over standard WiFi. Powered by the high-performance ESP8266 network processor, it uses lightweight UDP packets to transmit MAVLink telemetry to any mobile device or PC running UDP-capable GCS software. Installation is plug-and-play on CUAV V5+, X7 controllers, enabling rapid deployment and configuration without additional radios. Ideal for indoor testing, field tuning, or situations where RF links are impractical, this compact module delivers reliable, cost-effective telemetry connectivity for professional and hobbyist UAV operations.\n\nSpecifications:\n\nNetwork Processor: ESP8266 WiFi SoC\nCompatibility: CUAV V5+, X7\nDimensions: 10 × 10 × 10 mm\nWeight: 0.3 g\n\nPackage Includes:\n\n1 × Wifi Telemetry Module CUAV V5+\/X7 version\n\n\u003c\/pre\u003e\n\n\u003c\/body\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":55964006842755,"sku":"PJ01028","price":28.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/1873\/3443\/files\/21086_wifi-telemetry-module-cuav-v5--x7-version.jpg?v=1752066284"},{"product_id":"airspeed-sensor-cuav-skye-2-nano","title":"Airspeed Sensor CUAV SKYE 2 NANO","description":"\u003cbody\u003e\n\n\n\u003cstyle\u003e\n  body {\n    font-family: Arial, sans-serif;\n    font-size: 14px;\n  }\n\n  pre {\n    font-family: Arial, monospace;\n    white-space: pre-wrap;\n  }\n\n  .highlight {\n    font-weight: bold;\n  }\n\u003c\/style\u003e\n\n\n\u003cpre\u003eAirspeed Sensor CUAV SKYE 2 NANO\n\nThe CUAV Skye 2 Nano Airspeed Sensor delivers precise airspeed readings for fixed-wing and VTOL UAVs via a rugged DroneCAN interface. Featuring the high-performance DLVR_L10D differential pressure sensor, it measures speeds from 0 to 226.8 km\/h with ±1 % accuracy. Encased in a lightweight aluminum alloy housing (32.0 × 33.4 × 18.5 mm), the Nano module integrates seamlessly with PX4 and ArduPilot (CUAV\/Pixhawk) systems. Operating on 4.75–5.3 V and in –20 °C to +85 °C environments, it’s ideal for demanding flight conditions. At just 15 g, it adds minimal weight while enhancing your autopilot’s aerodynamic control and flight efficiency.\n\nSpecifications:\n\nSensor Element: DLVR_L10D differential pressure transducer\nAirspeed Range: 0 – 226.8 km\/h\nAccuracy: ±1 %\nInterface: DroneCAN (FD capable)\nPower Input: 4.75 – 5.3 V\nCurrent Draw: ≤20 mA (typical)\nOperating Temperature: –20 °C – +85 °C\nHousing Material: Aluminum alloy\nDimensions: 32.0 × 33.4 × 18.5 mm\nWeight: 15 g\nCompatibility: PX4, ArduPilot, CUAV and Pixhawk flight controllers\n\nPackage Includes:\n\n1 × Airspeed Sensor CUAV SKYE 2 NANO\n\n\u003c\/pre\u003e\n\n\u003c\/body\u003e","brand":"Baltic Drones","offers":[{"title":"Default Title","offer_id":55964006908291,"sku":"C0118","price":129.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/1873\/3443\/files\/21089_airspeed-sensor-cuav-skye-2-nano.jpg?v=1752066293"}],"url":"https:\/\/p1c5mr-sk.myshopify.com\/collections\/cuav.oembed","provider":"Baltic Drones","version":"1.0","type":"link"}